Lithium Polymer Batteries Connectors

Popular connectors for the Lithium Polymer Battery

LiPol Custom-shaped batteries are designed to fit into any and all spaces in a product. In order to provide the best efficiency, LiPo batteries can be made to fit into even unused spaces. We provide Custom LiPo Batteries, semi-custom LiPo Batteries, and off-the-shelf LiPo Batteries. With our proprietary formula and high discharge-rate technology, you can maximize the run time and use of your product. we are the industry-leading manufacturer of shaped LiPo batteries. 

We design and manufacture custom Lithium Polymer Batteries’ packs to customers’ specifications. If you need a specific Lithium Polymer Batteries pack, we can advise the best possible solution, Customized Your Lithium Polymer Battery in Any Size, Capacity, and Shape, Meet Your Different Needs by Assembling the Lithium Polymer Battery in Series and Parallel.

A lithium Polymer battery connector is a device that allows for the electrical connection between a battery and a device or charger. Lithium Polymer battery connectors can come in various shapes, sizes, and types, depending on the type of battery and the device it is being used with.

For example, some common types of lithium polymer battery connectors include:

JST (Japan Solderless Terminal) connectors – These are small, two-pin connectors that are commonly used for low-voltage batteries in small electronic devices.

XT60 connectors – These are larger, three-pin connectors that are commonly used for high-power batteries in remote-controlled vehicles and drones.

Deans connectors – These are two-pin connectors that are commonly used for high-power batteries in RC vehicles and airplanes.

Banana plugs – These are two-pin connectors that are commonly used for batteries in testing and measurement equipment.

All kinds of connectors can be added as your request.

When choosing a Lithium Polymer battery connector, it is important to consider factors such as the voltage and current rating of the battery, the size and shape of the Lithium Polymer battery connector, and compatibility with the device or charger being used. It is also important to ensure the Lithium Polymer battery connector is installed correctly and secured to prevent damage or accidents.

1. Choose the connectors for your Lithium Polymer Battery

Lipol Battery is the manufacturer of Lithium Polymer cells, our cells can also be assembled with connectors. The connectors we use are mainly from three famous brands Molex”, JST and Hirose. You can browse the following page to select the connectors you want, Show us the pictures of the connectors that you may need if you haven’t found suitable connectors on this page.

2. Purchase connectors with cables

Our company also sell connectors with cables, you just need to tell us your requirements. Such as connectors part number, crimp terminal, cables length. Then, well give you the assembled-end-use products!

Molex 51021-0200

The most popular connector for lithium polymer battery.

Manufacturer:
Molex
Part Number:
51021-0200
Application: 
single, wire to board or wire to wire
Circuits(max): 
2
Pitch:
1.25mm(0.049’’)
Crimp Terminal:
50058, 50079
Mating wires: 
UL1571 28/30/32AWG
Mating Parts:
51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header
Link:

Molex 51021-0300

The most popular 3P connector for Lithium Polymer batteries with NTC connection.

Manufacturer:
Molex
Part Number:
51021-0300
Application: 
single, wire to board or wire to wire
Circuits(max): 
3
Pitch:
1.25mm(0.049’’)
Crimp Terminal:
50058, 50079
Mating wires: 
UL1571 28/30/32AWG
Mating Parts:
51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header
Link:

JST SHR-02V-S-B

It’s much smaller connector with pitch 1.0mm for lithium-polymer-batteries.

Manufacturer:
JST
Part Number:
SHR-02V-S-B
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
2
Pitch:
1.00mm(0.039’’)
Crimp Terminal:
SSH-003T-P2.0-H
Mating wires: 
UL1571 28/30/32AWG
Mating Parts:
BM02B-SRSS-TB
Link:

JST SHR-03V-S-B

It’s much smaller 3P connector with pitch 1.0mm for Li-Polymer battery and NTC.

Manufacturer:
JST
Part Number:
SHR-03V-S-B
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
3
Pitch:
1.00mm(0.039’’)
Crimp Terminal:
SSH-003T-P2.0-H
Mating wires: 
UL1571 28/30/32AWG
Mating Parts:
BM03B-SRSS-TB
Link:

JST ACHR-02V-S

It’s the smallest connector for connection PCB and lithium polymer battery in a limited space.

Manufacturer:
JST
Part Number:
ACHR-02V-S
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
2
Pitch:
1.20mm(0.047’’)
Crimp Terminal:
SACH-003G-P0.2, SACH-003G-P0.2B
Mating wires: 
UL1571 28/30/32AWG
Mating Parts:
BM02B-ACHSS-GAN-ETF
Link:

JST ACHR-03V-S

It’s the best connection solution for connection in narrowapplication.

Manufacturer:
JST
Part Number:
ACHR-03V-S
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
3
Pitch:
1.20mm(0.047’’)
Crimp Terminal:
SACH-003G-P0.2, SACH-003G-P0.2B
Mating wires: 
UL1571 28/30/32AWG
Mating Parts:
BM03B-ACHSS-GAN-ETF
Link:

Molex 50-37-5023 (5264-02)

It’s a popular connector with pitch 2.5mm and friction lock for wire to board.

Manufacturer:
Molex
Part Number:
50-37-5023 (5264-02)
Application: 
Wire to Board, Friction lock Connectors
Circuits(max): 
2
Pitch:
2.5mm(0.098’’)
Crimp Terminal:
08-70-1039
Mating wires: 
UL1571 22/24/26/28AWG
Mating Parts:
5267 vertical shrouded PCB header, 5268 right angle shrouded PCB header
Link:

Molex 50-37-5033 (5264-03)

It’s a popular connector with pitch 2.5mm and friction lock for wire to board and NTC/thermister.

Manufacturer:
Molex
Part Number:
50-37-5033 (5264-03)
Application: 
Wire to Board, Friction lock Connectors
Circuits(max): 
3
Pitch:
2.5mm(0.098’’)
Crimp Terminal:
08-70-1039
Mating wires: 
UL1571 22/24/26/28AWG
Mating Parts:
5267 vertical shrouded PCB header, 5268 right angle shrouded PCB header
Link:

JST PHR-2

The dimple at the center of the contact ensures positive contact and low contact resistance for lithium polymer battery at all times.

Manufacturer:
JST
Part Number:
PH-2, PHR-2, PH connector
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
2
Pitch:
2.0mm (0.078’’)
Crimp Terminal:
SPH-002T-P0.5S, SPH-002T-P0.5L, SPH-004T-P0.5S
Mating wires: 
UL1571 24/26/28/30/32AWG
Mating Parts:
B2B-PH-K-S, S2B-PH-K-S
Link:

JST PHR-3

The dimple at the center of the contact ensures positive contract and low contact resistance for Lithium Ion Polymer Battery at all times.

Manufacturer:
JST
Part Number:
PH-3, PHR-3, PH connector
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
3
Pitch:
2.0mm (0.078’’)
Crimp Terminal:
SPH-003T-P0.5S, SPH-003T-P0.5L, SPH-004T-P0.5S
Mating wires: 
UL1571 24/26/28/30/32AWG
Mating Parts:
B3B-PH-K-S, S3B-PH-K-S
Link:

JST XHP-2

It’s a high reliability and versatility for lipo batteries with 2P and clips.

Manufacturer:
JST
Part Number:
XH-2, XHP-2, XH connector
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
2
Pitch:
2.5mm (0.098’’)
Crimp Terminal:
SXH-001T-P0.6N, SXH-001T-P0.6
Mating wires: 
AWG#22
Mating Parts:
B2B-XH-A, B2B-XH-2
Link:

JST XHP-3

It’s a high reliability and versatility for lipo batteries with 3P and clips.

Manufacturer:
JST
Part Number:
XH-3, XHP-3, XH connector
Application: 
Wire to Board Crimp style Connectors
Circuits(max): 
3
Pitch:
2.5mm (0.098”)
Crimp Terminal:
SXH-001T-P0.6N, SXH-001T-P0.6
Mating wires: 
AWG#22
Mating Parts:
B3B-XH-A, B3B-XH-2
Link:

JST SYR-02T/02TY & SYP-02T/02TV-1

It’s a better solution of wire to wire connector with higher current and voltage.

Manufacturer:
JST
Part Number:
RCY connector, SYR-02T/SYR-02TY, SYP-02T-1/SYP-02TV-1
Application: 
Wire to Wire Connector, Crimp style with locking device
Circuits(max): 
2
Pitch:
2.5mm(0.059’’)
Crimp Terminal:
SCZH-002T-P0.5
Mating wires: 
UL1571 26/28AWG
Mating Parts:
B02B-CZHK-B-1, S02B-CZHK-B-1, BM02B-CZSS-1-TF, SM02B-CZSS-1-TB
Link:

JST ZHR-2

It’s a also populer connector with 1.5mm pitch.

Manufacturer:
JST
Part Number:
ZHR-2
Application: 
Disconnectable crimp style connectors
Circuits(max): 
2
Pitch:
1.5mm(0.098”)
Crimp Terminal:
SZH-002T-P0.5, SZH-003T-P0.5
Mating wires: 
UL1571 26/28/30/32/AWG
Mating Parts:
B2B-ZR, S2B-ZR, B2B-ZR-3.4, S2B-ZR-3.4
Link:

JST ZHR-3

It’s a also populer connector with 1.5mm pitch.

Manufacturer:
JST
Part Number:
ZHR-3
Application: 
Disconnectable crimp style connectors
Circuits(max): 
3
Pitch:
1.5mm(0.098’’)
Crimp Terminal:
SZH-002T-P0.5, SZH-003T-P0.5
Mating wires: 
UL1571 26/28/30/32/AWG
Mating Parts:
B3B-ZR, S3B-ZR, B3B-ZR-3.4, S3B-ZR-3.4
Link:

Molex 78172-0002

It’s a samller and populer connector with 1.2mm pitch.

Manufacturer:
Molex
Part Number:
78172-0002
Application: 
Wire to Board Housing connector
Circuits(max): 
2
Pitch:
1.2mm(0.047’’)
Crimp Terminal:
78172-0410
Mating wires: 
UL1007 28/30AWG
Mating Parts:
78171-0002
Link:

Molex 78172-0003

It’s a samller and populer connector with 1.2mm pitch.

Manufacturer:
Molex
Part Number:
78172-0003
Application: 
Wire to Board Housing connector
Circuits(max): 
3
Pitch:
1.2mm(0.047’’)
Crimp Terminal:
78172-0410
Mating wires: 
UL1007 28/30AWG
Mating Parts:
78171-0003
Link:

Molex 51047-0200

1.25mm Pitch Wire to wire plug housing 51021-0200

Manufacturer:

Molex

Part Number:

51047-0200, 51047-0300

Application:

Wire-to-wire

Circuits(max):

2 to 10

Pitch:

1.25mm (0.049’’)

Crimp Terminal:

0501258000 & 0501338000

Mating wires:

AWG28, AWG30, AWG32

Mating Parts:

51021-0200, 50121-0300

Link:

http://www.molex.com/molex/products/datasheet.jsp?part=active/0510470200_CRIMP_HOUSINGS.xml

Molex 504051-0401

Its a smaller height of 2.00mm with 4 circuits connector.

Manufacture:       Molex

Part Number:      504051-0401, 504051-0501, 504051-0601

Application:          Wire to board header

Circuit(Max):       4 to 12

Pitch:                    1.5mm(0.059″)

Crimp Terminal: 5040520089

Mating wires:      AWG24, 26, 28

Mating Parts:      5040500491, 5040500591, 5040500691

Link:     http://www.molex.com/molex/products/datasheet.jsp?part=active/5040510401_CRIMP_HOUSINGS.xml

Molex 51004/51065

Its another popular connector 2.00mm pitch made by Molex.

Manufacturer:       Molex

Part Number:      51004-0200, 51004-0300, 51004-0400

Application:          Wire to board header

Circuit(Max):       2 to 10

Pitch:                    2.00mm(0.0787″)

Crimp Terminal: 50011

Mating wires:      AWG24, 26, 2830

Mating Parts:      53253 53254

Link:   http://www.molex.com/molex/products/datasheet.jsp?part=active/0510650300_CRIMP_HOUSINGS.xml

JST SHR-02V-S-B for Lithium Polymer batteries

Manufacturer:  JST

Part Number: SHR-02V-S-B

Application: wire to board crimp style connectors

Circuit(Max): 2

Pitch: 1.00mm(0.039″)

Crimp Terminal: SSH-003T-P0.2H

Mating wires: UL1571 28/30/32AWG

Mating Parts: BM02B-SRSS-TB

Link: http://www.jst-mfg.com/product/pdf/eng/eSH.pdf

JST SHR-03V-S-B for NTC and Lithium polymer batteries

Manufacturer: JST

Part Number: SHR-03V-S-B

Application: wire to board crimp style connectors

Circuit(Max): 3

Pitch: 1.00mm(0.039″)

Crimp Terminal: SSH-003T-P0.2-H

Mating wires: UL1571 28/30/32AWG

Mating Parts: BM03B-SRSS-TB

Link: http://www.jst-mfg.com/product/pdf/eng/eSH.pdf

Molex 90156

Its a single row with 2.54mm pitch connector.

Manufacture:       Molex

Part Number:      90156-0142, 90156-0143, 90156-0144, 90156-0145,

Application:          Wire to board header

Circuit(Max):       2 to 32

Pitch:                    2.54mm(0.0762″)

Crimp Terminal: 0901190109, 0901190110, 0901190111

Mating wires:      AWG22, AWG24

Mating Parts:      90120, 90121, 90136

Link:   http://www.molex.com/molex/products/datasheet.jsp?part=active/0901560145_CRIMP_HOUSINGS.xml

JST SUR connector

The worlds first 0.8mm pitch wire to board insulation displacement connector is connected lithium polymer battery for the wearable.

Manufacturer:       JST

Part Number:      02SUR-32S, 03SUR-36L, 03SUR-32S, 03SUR-36L, 04SUR-32S, 04SUR-36L, 05SUR-32S, 05SUR-36L

Application:          Disconnect-able insulation displacement connector

Circuit(Max):       2 to 22

Pitch:                    0.8mm(0.031″)

Crimp Terminal: NO

Mating wires:      UL1007 32/36AWG

Mating Parts:      BM02B-SURS-TF, SM02B-SURS-TF, BM03B-SURS-TF, SM03B-SURS-TF, BM04B-SURS-TF, SM04B-SURS-TF

Link:                 http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf

JST SUHR-02V-S-B

SUH connector has the smallest 0.8mm pitch wire to board insulation displacement connector.

Manufacturer:       JST

Part Number:      SUHR-02V-S-B,SUHR-03V-S-B,SUHR-04V-S-B,SUHR-05V-S-B,SUHR-06V-S-B,SUHR-07V-S-B,

Application:          wire to board

Circuit(Max):       2 to 20

Pitch:                    0.8mm(0.0314″)

Crimp Terminal: SSUH-003T-P0,15, SSUH-0035T-P0.15

Mating wires:      UL1007 28/30/32AWG

Mating Parts:      BM02B-SURS-TF, SM02B-SURS-TF, BM03B-SURS-TF, SM03B-SURS-TF, BM04B-SURS-TF, SM04B-SURS-TF

Link:                http://www.jst-mfg.com/product/pdf/eng/eSUH.pdf

JST ADHR-03V-H

Its a lower profile type of connector with a height of 1.9mm. The ultra-thin lithium polymer battery series with this connector is using thinner applications.

Manufacturer:       JST

Part Number:      ADHR-03V-H

Application:          wire to board

Circuit(Max):       3&5

Pitch:                    1.3mm(0.0511″)

Crimp Terminal: SADH-002G-P0.2, SAD-003-P0.2

Mating wires:      AWG26, AWG28

Mating Parts:      BM02(3)B-ADHSS-GAN-ETB, BM03B-ADHKS-GAN-ETB,BM05B-ADHKS-GAN-ETB(HF)

Link:               http://www.jst-mfg.com/product/pdf/eng/eADH.pdf

Hirose DF65-3S-1.7C

Low Profile wire-to-board 1.7mm pitch connectors for power supply of Lithium Polymer battery.

Manufacturer:       Hirose

Part Number:      DF65-3S-1.7C, DF65-4S-1.7C, DF65-5S-1.7C, DF65-6S-1.7C, DF65-7S-1.7C

Application:          wire to board

Circuit(Max):       3 to 7

Pitch:                    1.7mm(0.067″)

Crimp Terminal:DF65-2428SCF, DF65-2428SCFA

Mating wires:    AWG24(11*0.16mm),AWG26(7*0.16mm),AWG28(7*0.127mm)

Mating Parts:      DF65-3P-1.7V,DF65-4P-1.7V,DF65-5P-1.7V,DF65-6P-1.7V,DF65-7P-1.7V

Link: https://www.hirose.com/product/en/products/DF65/DF65-3S-1.7C/

Hirose DF13-2S-1.25C/ DF13-3S-1.25C

Pitch miniature crimping 1.25mm popular connector.

Manufacture: Hirose

Part Number: DF-13-2S-1.25C,DF13-3S-1.25C, DF13-4S-1.25C, DF13-5S-1.25C, DF13-6S-1.25C,DF-13-7S-1.25C

Application: wire to board

Circuit(Max): 2 to 15

Pitch: 1.25mm(0.049″)

Crimp Terminal: DF13-2630SCF, DF13-3032SCFA, DF13-3032SCFA

Mating wires: AWG26(7*0.16mm),AWG28(7*0.127mm),AWG30(7*0.1mm)

Mating Parts: DF-13-2P-1.25DSA, DF13-2P-1.25DS, DF13-2P-1.25V, DF13A-2P-1.25H

Link:     https://www.hirose.com/product/en/products/DF13/

Hirose DF52-2P-0.8C

SUH connector has the smallest 0.8mm pitch wire to board insulation displacement connector.

Manufacturer: Hirose

Part Number: DF52-2P-0.8C, DF52-3P-0.8C, DF52-4P-0.8C, DF52-5P-0.8C, DF52-6P-0.8C, DF52-7P-0.8C,

Application: wire to board

Circuit(Max): 2 to 20

Pitch: 0.8mm(0.0314″)

Crimp Terminal: DF52-2832PCF

Mating wires: AWG28/30/32

Mating Parts: DF52-2S-0.8H(21),DF52-3S-0.8H(21),DF52-4S-0.8H(21),DF52-5S-0.8H(21),DF52-6S-0.8H(21)

Link:              https://www.hirose.com/product/en/products/DF52/