Certificated RoHS Lithium Polymer Batteries

3.7V Rechargeable LiPo Batteries Manufacturer Supplier, RoHS certificated lithium polymer batteries for your new device

What is RoHS?

The Restriction of Hazardous Substances Directive 2002/95/EC (RoHS 1), short for Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, was adopted in February 2003 by the European Union.

The RoHS 1 directive took effect on 1 July 2006 and is required to be enforced and become a law in each member state. This directive restricts (with exceptions) the use of ten hazardous materials in the manufacture of various types of electronic and electrical equipment. It is closely linked with the Waste Electrical and Electronic Equipment Directive (WEEE) 2002/96/EC (now superseded) which sets collection, recycling and recovery targets for electrical goods and is part of a legislative initiative to solve the problem of huge amounts of toxic electronic waste.

Each European Union member state will adopt its own enforcement and implementation policies using the directive as a guide.
RoHS is often referred to as the “lead-free directive,” but it restricts the use of the following ten substances:

Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ether (PBDE)
Bis(2-ethylhexyl) phthalate (DEHP)
Butyl benzyl phthalate (BBP)
Dibutyl phthalate (DBP)
Diisobutyl phthalate (DIBP)

Caution!  – Lithium Polymer Batteries

In order to prevent the Lithium Polymer Battery possibly occurs leaks, overheat, swollen, please note the preventive measure.

Handling Precautions and Guideline:

1.

When charge please select the lithium-polymer battery special battery charger.

2.

Strictly prohibits inverting the cathode use Lithium Polymer Battery.

3.

Strictly prohibits directly connect Lithium Polymer Battery to power source plug

4.

Please do not throw the Lithium Polymer Battery to water or put into heater

5.

Strictly prohibits plunging the Lithium Polymer Battery in sea water or water, when Lithium Polymer Battery do not use, please store Lithium Polymer Battery in the cool-dry environment.

6.

The prohibition in strong static electricity and strong magnetic field place use otherwise is easy to destroy the Lithium Polymer Battery PCBA

7.

The prohibition puts the Lithium Polymer Battery nearby the hot high-temperature source, like the fire, the heater, and so on use and leaves alone

8.

The prohibition directly connects the Lithium Polymer Battery cathode with the metal to short-circuit.

9.

The prohibition rap or throws, steps on the Lithium Polymer Battery and soon

10.

Forbids directly to weld the Lithium Polymer Battery and pierces the Lithium Polymer Battery with the nail or other sharp weapons

11.

If the Lithium Polymer Battery sends out an unusual smell, gives off heat, the distortion, or appears any exceptionally, immediately moves the Lithium Polymer Battery from the installment or the battery charger to and stops using

12.

If the Lithium Polymer Battery occurs leaks, the electrolyte enters the eye, please do not have to rub scratches, the application clear water flushing eye and delivers the medical treatment otherwise to be able immediately to injure the eye

13.

When Lithium Polymer Battery long-term storage, or assembly in the host, suggest customer should take every 6months carry on one time charge and discharge and recharge it to half charge state (3.7-3.9V)(the method: 0.2CmA charge and discharge)

14.

Abandon the battery to wrap up the electrode using the insulating paper, prevented the Lithium Polymer Battery short-circuits

15.

Do not decompose the Lithium Polymer Battery

16.

Keep small LiPo cells and Lithium Polymer Batteries which are considered swallowable out of the reach of children

17.

Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 h of ingestion

18.

In case of ingestion of a LiPo cell or Lithium Polymer Battery, seek medical assistance promptly.