3.7V Small 150mAh Lithium Polymer Batteries LP451528

Our Lithium Polymer Batteries with a Long Cycles Life, Fast Charging Capability,

This Lithium Polymer Batteries has a capacity of 150mAh for a total of about 0.55 Wh. If you need a larger battery, we also have a 200mAh+ model

Lithium Polymer Batteries included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection, it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 400mA or less.

Like most Lithium Polymer Batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less – 800mA max in this case which is how much you can get from a USB port.

If you need the protection circuit on the battery with a temperature sensor, you can add with 10K NTC.

Also you can choose the connector that you need to add with the battery, The connectors we use are mainly from three famous brands” Molex”, “JST” and “Hirose”. All battery connectors from Molex or JST are available to add to our lipo battery with the custom length of wires, wire sequence & wire colors. You can browse the following page to select the connectors you want.

Choose the suitable battery connector for your Lithium Polymer Batteries

Flexible Support of Lithium Polymer Batteries requirement: Simpler & faster Manufacturing, A cleaner & Greener process, Differentiated performance whatever your application, High energy and power cell for mobility applications, Bring us your special application.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these LiPo batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect LiPo batteries and surrounding circuitry constantly for any damage, loose wiring, or the possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all LiPo batteries and with any power source – they should be used by experts who are comfortable working with power supplies.

Application With 150mAh Lithium Polymer Batteries:

Check with 150mAh Lithium Polymer Batteries:

Hot Selling 150mAh Lithium Polymer Batteries: