3.7V Lithium Polymer Battery LP1260110 10000mAh

This 3.7V Lithium Polymer Battery capacity is 10000mAh, 37Wh Lithium Polymer Battery, 3.7V Lithium Polymer Battery with PCM and wires, 10000mAh Lithium Polymer Battery Cell is available, 3.7V Lithium Polymer Battery LP1260110 10000mAh.

This battery has a capacity of 10000mAh for a total of about 37Wh. If you need a larger capacity with lithium polymer batteries, we also have other 10000mAh+ lithium polymer batteries

Also, you can choose the connector that you need to add with the lithium polymer battery, The connectors we use are mainly from three famous brands” Molex”, “JST” and “Hirose”. All battery connectors from Molex or JST are available to add to our lithium polymer batteries with the custom length of wires, wire sequence & wire colors. You can browse the following page to select the connectors you want.

Choose the suitable battery connector for your lithium polymer batteries

This 3.7V Lithium Polymer Battery LP1260110 10000mAh with a battery size of 12mm* 60mm* 111mm, it can charge at 0.2C-0.5C, Discharge at 0.5C-1C due to this battery is the standard Lithium Polymer Battery, 10K NTC with thermistors can be built-in the lithium polymer battery; Also, you can choose the connector that you need to add with the Lithium polymer batteries, The connectors we use are mainly from three famous brands” Molex,” “JST” and “Hirose.” All Lithium polymer battery connectors from Molex or JST are available to add to our Lithium polymer batteries.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection, it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 0.5C or less.

Like most lithium polymer batteries we sell do not have thermistors built-in. This is why we suggest charging at 1/2C or even less in this case which is how much you can get from a USB port.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these LiPo batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect lithium polymer batteries and surrounding circuitry constantly for any damage, loose wiring, or the possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all lithium polymer batteries and with any power source – they should be used by experts who are comfortable working with power supplies.

Application With 3.7V Lithium Polymer Battery LP1260110 10000mAh:

Similar lithium polymer batteries with 3.7V Lithium Polymer Battery LP1260110 10000mAh

Similar lithium polymer batteries Model with 3.7V Lithium Polymer Battery LP1260110 10000mAh